Skip to main content
Sign In

College of Engineering and Applied Science

College of Engineering and Applied Sciences at UC Denver
 

College Seminar Series


College of Engineering and Applied Science Seminar Series
Tuesdays, 11 am - 12:15 pm
Location: North Classroom 1202

The CEAS Seminar Series is a flexible seminar format that covers special-interest topics in engineering. Topics vary from semester to semester with presentations from College of Engineering and Applied Science faculty, students and visiting professionals. The college community is welcome and encouraged to attend.

Students, both undergraduate and graduate, may enroll in the Seminar Series course for up to one credit total, which may be applied to their degree (advisor permission required). See the various course descriptions at the bottom of this page. 

Seminar Schedule | Spring 2015

All seminars are held Tuesdays from 11 a.m. to 12:15 p.m. in the North Classroom, room 1202.

January 27: Student orientation

February 3: Jose David Lara Jimenez, CU Denver visiting scholar, "Inertial Response Estimation in a Power System with High Wind Generation"

February 10: Sinduja Seethapathy, CU Denver graduate student in electrical engineering, "Detection of Sparse Signals"

February 17: Eric Hsu, CU Denver PhD candidate in civil engineering, "Deterministic Method for Floodplain Delineation on Alluvial Fans"

February 24: 

March 3:

March 10:

March 17: Toan Luu, CU Denver PhD student in civil engineering, "Storm Water Green Concept Using the Low-Impact-Development Approach"

March 24: No seminar (spring break)

March 31: Carlos Soriano, CU Denver PhD student in electrical engineering, "Low Frequency HVac Transmission using a Modular Multilevel Matrix Converter"

April 7: Bill McIntyre, CU Denver PhD student in civil engineering, "Alluvial Groundwater Storage in the South Platte River Basin in Colorado"

April 14: Miguel Carrasco, CU Denver PhD student in electrical engineering, "Optimal Dispatch of Distribution Systems Integrated with Inverter-Based Generation"

April 21: Charles Laheist, CU Denver graduate student in computer science and engineering, "Analyzing Genomic Transducer-Based Survey Data Using Qualitatively Robustness"

April 28: Farnoush Banaei-Kashani, assistant professor in computer science and engineering, "Managing and mining large, fast and multi-modal data: a research overview"

Course information

ENGR 4150 (undergraduates)
This is a variable credit course (0 – 1 credit). Students must register for zero credit hours, unless given explicit permission from faculty advisor to take it as a one-credit course.
Prereq: Senior standing

ENGR 5150 (graduate students)
This is a variable credit course (0 – 1 credit). Students must register for zero credit hours, unless given explicit permission from faculty advisor to take it as a one-credit course.
Prereq: Graduate standing

ENGR 7150 (EAS PhD students)
All Engineering and Applied Science PhD students are required to attend the CEAS seminar series for a minimum of two semesters at 0.5 credit per semester, up to one credit. Individual departments may require additional semesters of seminar attendance.
Prereq: Graduate standing

Grading: pass/fail. Attendance at 75 percent of the seminars per semester and submission of a report on at least one seminar per semester are required to pass.